Strands LED Light Bars Archives - Rhino 4x4

Strands Skylord LED Bar 20″

Ewert Jooste — Thu, 28 May 2026 11:40:08 +0000

Thanks to ingenious engineering, we’ve incorporated two light sources in one LED bar. The new beam pattern is designed for maximum visibility far ahead, close to the car, and to the sides. The housing is cast in one piece, and the LED bar is IP-rated IP69K. It is also covered by Strands’ new 5-year warranty.The Skylord features a built-in relay and a 2.5-meter cable. All necessary installation accessories are included: side and hanging brackets, washers, bolts, rubber pads, Strands logo–branded rubber covers, an XBB cable harness with Super Seal connector, and a position light switch. A CAN bus interface, such as XBB, may be needed to complete the installation.

The post Strands Skylord LED Bar 20″ appeared first on Rhino 4x4.

Strands Siberia Professional Wiring Harness 1 x DT Connector

Cristel — Wed, 29 Oct 2025 07:42:23 +0000

Works perfectly for connecting one Led bar. A fast, simple, and professional installation. The climate of the north creates both opportunities and dangers for the vehicle on the roads. On Siberia cable set pro 1x DT, a protective hose encloses the cables and the DT connector to provide extra protection. Both a mechanical protection against impact and wear as well as against dirt and water.The signal cable (brown 86) is used to connect the relay to our Canbus Interface. If the car is not touched by Canbus, pick up the signal directly from the car’s headlights with this cable. Siberia cable set professionals 1x DT have more uses. There is in addition Output 2 (blue 87A) which is used to be able to control another signal such as the position light on Siberia and the Dark Knight series. Output 2 is used when using XBB.From the cable set comes a two-pole DT connector and since both Siberia and the Dark Knight series use four-pole DT connectors due to dual position lights, it is sent with an adapter cable to convert from four-pole to two-pole DT connector. The adapter cable also has two loose cables that are used to supply power to the position light.The DT connector is only adapted for a consumption of 156W and if you are going to connect more people who consume more than 156W, this cable set can handle a maximum of 360W if the DT connector is cut off. Can for example be used for Siberia DR LED BAR 42” and 52”.Siberia cable set pro 1x DT makes it easy to perform a professional assembly. If you need to cut in the cable for various reasons, you can easily do so. Because there are two waterproof, shrinkable splice that make it possible to make a secure and tight closure afterwards and a hose clamp to reconnect the protective hose. But it is important that you cut at least 50 cm from the relay to ensure that the cable does not meet any moisture.

– For connection of lighting with both two-pole DT connector and four-pole DT connector.
– Protective hose that protects against impact and wear as well as moisture and dirt.
– Possibility to adjust the length of the cable, for an easier and nicer installation.
– An extra cable (blue 87A), for connecting, for example, XXB. To switch on, for example, position lights.

Read less

The post Strands Siberia Professional Wiring Harness 1 x DT Connector appeared first on Rhino 4x4.

Strands Siberia XPA Light Bar

Ewert Jooste — Fri, 23 May 2025 11:47:39 +0000

The 22″ model produces more than 7100 actual lumens and reaches over 600 meters in Xperience mode. With a 65% higher output than previous models, it offers strong forward visibility through its extended beam pattern—perfect for confidently lighting up the night.

The 32″ model steps up the performance with more than 10,900 actual lumens and an impressive range exceeding 700 meters in Xperience mode. Delivering 100% higher output than previous models, it provides a powerful long-distance beam pattern and outstanding forward visibility, even in the darkest environments.

Both models feature integrated amber and white position lights, allowing you to choose the distinctive amber glow. They also include the popular Hello function—simply flash your high beam twice in quick succession, and the position lights will signal a greeting to fellow drivers.

Built from durable materials with a robust powder-coated finish, these LED bars are designed for long-lasting performance. With an IP68/IP69K rating, they offer superior protection against dirt and water, ensuring reliability in harsh conditions.

Installation is quick and hassle-free thanks to the DT-4 connector and 550 mm cable. The E-mode is E-approved according to ECE R149/148 with reference number 20, making both models road-legal where applicable.

As part of the XP range, the Siberia XPA LED bars are backed by Strands Lighting Division’s 3-year function warranty for added peace of mind.

The post Strands Siberia XPA Light Bar appeared first on Rhino 4x4.

Strands Dark Night Nuuk LED Light Bar

Ewert Jooste — Tue, 08 Oct 2024 09:20:33 +0000

Ready to break new ground, made for electric vehicles, and comes with a sophisticated look and passion in every detail. An all-black look with a dark lens and super-slim no edge design, almost invisible when it becomes one with your vehicle. A perfect match for electric cars. Better performance. Less consumption. Standing behind our 3-year function warranty. Dark Knight Nuuk comes in three different sizes. Choose between 20”, and 30”. All models are E-approved. The light beam creates the perfect balance and gives you light where you need it—1 lux at 452 m, or 481 m depending on the size.

The post Strands Dark Night Nuuk LED Light Bar appeared first on Rhino 4x4.